Quantcast
Channel: Remote Desktop Services (Terminal Services) forum
Viewing all 25525 articles
Browse latest View live
↧

Terminal Server loads temp profiles

January 10, 2017, 6:36 am
$
0
0

Hi Guys,

We are experiencing an issue with one of our terminal servers were if we have more than 60 connections they all load into temporary profiles. We have done the usual of removing the sid from the profilelist in regedit, Remove the user account folder and we have replaced the default profile many times. It just seems once we have that magic 60 number it refuses to let another load his profile. The server has loads of resources and it's not under any load.

I have a license of 75 per device cals installed so im within my limit. It also shows 4 temporary device cals are issued is this normal?

Its Server 2008 r2.

Sorry any profiles beyond the 60th connection loads into a temporary profile.

I also get these messages even though it says i have 15 licenses available.

The Remote Desktop license server "MSK-TERMSERV-04" does not have any remaining permanent licenses of the type "Windows Server 2008 or Windows Server 2008 R2 : Per Device CAL (TS or RDS)". As a result, the Remote Desktop license server cannot issue licenses of the type "Windows Server 2008 or Windows Server 2008 R2 : Per Device CAL (TS or RDS)" to the Remote Desktop Session Host or Remote Desktop Virtualization Host server "MSK-TERMSERV-04". To resolve this problem, verify that the Remote Desktop licensing mode configured on the RDSH or RDVH server matches the type of licenses installed on the Remote Desktop license server. If required, purchase and install additional licenses as needed for this Remote Desktop license server.






↧
Search

RDP Licensing per user

January 12, 2017, 8:04 pm
$
0
0

I have a workgroup server 2003 that have 5 TS CAL per user license.

In the server have 3 users. Admin, Jack and John.

Can I RDP from 7 computer using Jack username and RDP from 9 computer using John username simultaneously?

↧
↧

Remote Desktop Session

January 13, 2017, 12:16 am
$
0
0

I am getting error in server 2012r2. log on time

the task you are trying to do can't be completed because remote desktop services is currently busy please try again in a few minutes. other users should still be able to log on

↧

RDS - Session Virtualisation - How to open App in users own desktop

January 16, 2017, 5:23 pm
$
0
0

Hi Guys
I am hoping to get some clarification.
I am in the middle of deploying a RDS FARM (Session Virtualization) for a client.
I will be presenting a bunch of URL in the "Remote App" page once a user authenticates via the webaccess URL.

I understand when a user clicks on a URL from the Remote App page it fires up a RDP session for the user and hides the RDP window so the user gets a feel that they are using a Web app. But this means, the user is using the RDS Farm resources when they click on the URL.

Question

Is it possible to have a Citrix like experience, ie, when the user clicks on the URL from the Remote app page
rather than opening an IE browser window from the Session Host server the IE session opens from users own desktop?

Thanks in advance
J

MCITP, MCSA, MCSE,VCP - Consultant, Solution Design, Implementation

↧

Server2016 Essentials cannot add RDS Virtualization Host

January 16, 2017, 6:29 pm
$
0
0

I get either this error in the quick start deployment:

Failed:
Unable to install the role services. ArgumentNotValid: The role, role service, or feature name is not valid: 'rds-virtualization'. The name was not found.

Or

Failed:
Unable to install RD Virtualization Host role service on server DC-BOZ-01.BOZIEDOIL.local ArgumentNotValid: The role, role service, or feature name is not valid: 'rds-virtualization'. The name was not found.
Unable to install RD Virtualization Host role service on server DC-BOZ-01.BOZIEDOIL.local Exception of type 'System.Exception' was thrown.

All other RDS services including licensing are working and licenses installed. Hyper-V is installed and basic VM configured ok. Just cannot get a Virtualization Host configured to get users to it.

Ooo, yikes. everything else in RDS was working now it is blank.

Help!



↧
↧

Multiple RDS deployments same forest

January 9, 2017, 2:38 am
$
0
0
The setup has:
-2x 2012R2 server with the session host role configured
-1x 2012R2 server with the gateway, webaccess and connection broker installed
-1x domain controller
-1x application server running a SQL database

A application is published on the RD Web Access server, the users are only using the remote app to connect. 
-The web access URL: tenant.fabrikam.com
-The gateway URL: tenant.fabrikam.com

The plan is to setup a multitenant environment, the others customers need to access a different domain/URL, for example:  tenant.contoso.com

An option would be to add a second RD Web access website to the existing RD Web Access server, however the preferred way is to add a second RD Web Access server. But the problem is the RD Gateway is also installed on the same server and has the wildcard certificate.

For the reason above i think the best option is to deploy a new RDS infrastructure (Gateway, Web Access, Connection Broker and Session hosts) that uses the same AD domain and is able to use the same application server. 

Is it possible to deploy multiple remote desktop services in the same forest?

↧

Corrupt Windows 2012 RDS Basic Color Scheme

January 4, 2017, 4:30 am
$
0
0

We have one Windows 2012 R2 server that has been functioning fine up to a couple of weeks ago.  After a reboot the screen colors went haywire.  It seems somehow the “Windows Basic” color scheme got corrupted. Black text becomes yellow text. White backgrounds become black backgrounds. The right-hand scroll bar becomes black with white outline. And in some cases white text will replace black text on a white background, rendering the window contents invisible.

Following a number of suggestions online I have been able to get this server back where users can use it.  What I have read online indicates that a reboot (due to MS Updates or whatever other reason) could cause this corruption again.

What I want to know - has MS come out with a permanent fix for this issue?  Just because the basic color scheme gets corrupted is no reason to have to reload a server (one suggestion I found online).  As I see things, this should be a situation like installing a new updated graphics driver to fix a resolution issue. 

What about it MS?  Care to pipe in with your thoughts on this matter? 

What does the community have to say?  I am hoping you tell me there is at least a hot fix for this.

Thanks

↧

Issue with Remote desktop Services within Direct Access

January 12, 2017, 8:38 am
$
0
0

I have set up Remote Desktop Services on a Windows 2012 R2 Server.  Internally everything is working as expected.  The next stage is to get it to work via DirectAccess. 

I can log into DirectAccess as me (member of the Domain Admin group) and get to the RDWeb page,  but when I click on the RemoteApp Program,  I get the "Remote Desktop can't connect to the remote computer for one of these Reasons:  etc."

But if still logged into DirectAccess as me, I log into the RemoteApp program as the Domain Administrator it all works as it should.

Anybody have any ideas?

↧
Search

Is there a way to locate my Remote Desktop Licensing Server?

January 12, 2017, 3:53 am
$
0
0

Hello,

Let me give you some context:) I'm new in a company. We have a medium size environment and we still use Server 2003 Terminal Server for user access.

We've added a few 2012 RDS Servers to replace the old TSs and ran into a brick wall with licensing. 

As far as I know, there is/was a licensing server hidden somewhere, but I don't know where.

Is there a way to locate that server? A Powershell command maybe?

Or if I connect to a 2003 TS, is there a way to find out who issued its license?

↧
↧

Unable to Publish apps

January 5, 2017, 2:54 pm
$
0
0

Hi Everyone,

I recently stood up a 2012R2 server and setup remote desktop services.  Since this was for testing, I installed all roles on (1) server.  I set it up and published apps needed as of yesterday (1/4/2017).  Today I can no longer publish any apps.  I can modify them or remove them, just cannot add a new one.  When I attempt to publish a new one I get:

The following requirements should be met for the RD Session Host Servers in the collection:

1. You must be an administrator on the RD Session Host Server ( I am Domain Admin, which is added to the local admin group)

2. The RD Session Host server is running. (One server runs all roles and all services show running)

I can still access the RDWeb portal and launch applications. I did find one forum mentioning the need to license Office 2013.  I went and installed my license, but it did not resolve the issue.

No changes were done on this server during the time mentioned.  I also am the only one with access to it.  I do have some event log errors:

1. ID: 20499:  I am assuming this is just Remote desktop trying to map user drives and redirected folders and it is failing.

2. ID 2056: The Remote Desktop Connection Broker server could not enumerate the targets for the provider named NULL from the database.

I have also uninstalled all roles and reinstalled w/ same results.  Although this time when I reinstalled, the default published apps were not there. (notepad, paint, etc).  I must be missing something.  Any ideas would be appreciated.


↧

Can't change RDWeb password for non-admin accounts

January 5, 2017, 7:56 am
$
0
0

I have enabled the password change option for Remote Desktop Web Services in Server 2008 R2 and applied the necessary hotfixes. I can change admin passwords, but am unable to change any user/non-admin passwords. When I do, I get the following error message:

Your new password does not meet the length, complexity, or history requirements of your domain. Try choosing a different new password.

No matter how complex I make the password, it still gives me that error. I understand that I may be able to change the "Password must meet complexity requirements" group policy option, but is that the only way? Even then, why wouldn't a very secure password work for non-admin accounts?

↧

RDS high availability with two RDS servers

January 4, 2017, 10:30 pm
$
0
0

Hello,

Can we use high availability with two servers.

one server hold All RDS server roles(Licence, Session host, Connection Broker, Gateway).

I referred on Internet for guidance. But most articles have provided details to use two or more server for one RDS role.

It's high cost solution and most of organization consider cost effective solution.

If anyone know best cost effective solution, Please provide that.

↧

terminal serwer session

January 2, 2017, 5:39 am
$
0
0
Hi

My question is for Windows Server 2012 R2. I have two machines performing the functions of a terminal server. He needs to set equally user sessions were broken down into one and the second server how to do it?

thank you
↧
↧

RDS 2016 blue screen and issue with UmRdpService

January 2, 2017, 5:51 am
$
0
0

Hi

I have created a new infrastructure on Windows Server 2016 (French) :

- 1 DC

- 1 Broker RDS

- 2 RDS

- 1 RDS Web Access

I use the fonctionnality User Profile Disks for RDS

My first issue is a random reboot with a blue screen. Exactly the same issue that this post

https://social.technet.microsoft.com/Forums/exchange/en-US/cf843781-195e-418f-a124-5e40dee0d901/windows-server-2016-crashes-with-error-in-rdbsssys?forum=ws2016

As indicated, i turned off drive redirection in my GPO and since problem stopped.

I hope Microsoft will release a fix quickly.

Now i have a second issue where i don't find documentation to solve it.

Randomly on each RDS Server, no remote desktop connection can be established, i have a black screen after login to RDS Server.

In system event i have the error

Event ID: 7011 A timeout (30000 milliseconds) was reached while waiting for a transaction response from theUmRdpService service

I'm tried to reboot the RDS Service but the service doesn't restart.Currently i reboot the server but i want to fix this problem.

On Windows Server 2012R2, i finded the KB3047296 but it's not for my OS.

https://support.microsoft.com/en-us/kb/3047296

I don't know if my two issues are linked but i need help to solve it.

Thank you for your help

Best Regards

↧

Remote Desktop Services Post deployment document template

January 18, 2017, 11:04 am
$
0
0

Hi All

I have just installed an RDS solution for one of my customers, I am now in the process of creating a document outlining the schematics and infrastructure, basically what is RDS and how it works.

Is there any template that I can use that will help me create this document?

Regards

Adrian

↧
Search

Windows Server Foudantion / Remote Desktop Service

January 13, 2017, 5:37 am
$
0
0

Hello community.

My names is Franklin.
It is advisable to install RDS cals in windows server Foundation? Will exist all features?

*I know it's the product has 50 RDS Access Gateway

Windows server Foundation to be used as a domain controller and with a separate license server?

↧

Local Drive not available through RDP

January 10, 2017, 2:20 am
$
0
0

hello

setup as follows:

1 x windows 2012 r2 server acting as RDS

1 x windows 2012 r2 server acting as RDG

same subnet

gpo acting on RDS but only computer config - admin templates - windows components - terminal services - terminal server - device and resource redirection -- do not allow com port redirection, do not allow smart card device redirection and do not allow supported plug and play device redirection

RDG has CAP that allows device redirection for all client devices

however, when i connect to the RDS from my windows 10 machine (via the RDG), no local drives have been redirected.

also, if i log onto the main File server then from that, rdp to the RDS directly, still no redirected drives.

yes, i've checked that drives are checked on the remote desktop client.

any ideas?

↧
↧

Remote App won't close

January 9, 2017, 12:35 pm
$
0
0

Hi, I have a Published Remote app On windows 2008r2 and the app runs ok but just in one laptop fails, when the user close it the app again is open itself 

PS : The laptop has windows 10 but the app runs fine on other laptops with windows 10.

↧

Corrupt basic theme, inverted colors

January 9, 2017, 12:31 pm
$
0
0
Weird issue I've seen around the web and here on technet occasionally with no true fix so I'm asking for a bit of help. It seems we have inverted colors on most of our remote app servers. Attempts to take ownership of the vscache folder for deletion throws a "failed to enumerate" error. I've had success taking ownership on a non remote app server but still get access denied when trying to delete the vscache folder. I've tried the registry gpo fix detailed here: http://ravingroo.com/1466/fix-windows-server-2012-corrupt-color-scheme-theme-yellow-text-black-background-issue/. I'm bouncing a few servers as we speak, but as of last night in my home environment I was unable to fix the issue with this workaround on a server I cloned from my corporate production farm. I've run the latest updates on one server and bounced it with no luck. I may resort to a snapshot but we can't keep taking snapshots of remote app servers each time this happens. Installing the desktop experience has not worked either. I'm really hoping Microsoft has a patch that can be applied or a permanent work around.
↧

How many users are connect at time to Remote windows Server 2012

January 9, 2017, 3:07 am
$
0
0

Hi Team,

We  have windows server 2012 at remote location, 

We want to connect simultaneous minimum 10 users to that server ,

Is it possible if possible ,how many ways to we do please guide urgent basis.

Thanks in Advances!!!


↧
Viewing all 25525 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>